| 产品特点 Features | 产品应用 Applications | ||
| ◆ 高亮度、高可靠 High Brightness & High Reliability | ◆ 光纤激光系统泵浦 Fiber laser pumping | ||
| ◆ 波长976nm或915nm 976nm or 915nm | ◆ 光纤放大系统泵浦 Fiber amplification pumping | ||
◆ 驱动，激光二极管，散热，隔离高度集成 Integrating Driver, Laser Diode, Heat Sink, Isolator
多模泵浦模块是一款为高功率光纤激光器和光纤放大器等应用而设计的高稳定度泵浦光源。集成光模块、控制系统于一体，模块化封装，便于系统集成。通用的通信接口（可根据用户的要求定制）和控制软件，通过计算机实现参数调整和各项控制。 | |||
The multi-mode fiber pump module is a high stability optical source, designed for fiber laser and fiber amplification systems. It can offer 10W, 30W, 60W, 140W of power and a tighter wavelength range specifation at 976nm or 915nm with a isolator protection.Optical device and eletrical circuit are integrated into one module, which can conveniently apply into any laser system. The parameters setting and control can be operated via computer.
技术参数 Specifications
| 参数Parameters | 单位Unit | 最小Min | 典型Typ | 最大Max |
| 中心波长Center Wavelength | nm | 973 | 976 | 979 |
| 输出功率Output Power | mw | —— | —— | 600 |
| 光谱宽度@13db Spectral width@13dB | nm | —— | 0.2 | —— |
| 隔离器Isolation | dB | —— | 30 | —— |
| 功率稳定性Power Stability | % | —— | —— | 2 |
| 输出功率可调范围Output Power Tunability | % | 0 | —— | 100 |
| 温控稳定度TEC Stability | ℃ | —— | ±0.1 | ±0.2 |
| 温控工作范围TEC work range | ℃ | 20 | 25 | 40 |
| 输出光纤规格Output Fber Type | PM980 | |||
| 输出光纤长度Output Fiber Length | m | 1 | ||
| 输出光纤连接头类型Output Fiber connector Type | Bare（FC/UPC,FC/APC） | |||
| 控制接口Control Interface | CANBUS and RS232 | |||
| 接口类型Interface Type | DUAL-RJ45, DB9(FEMALE) | |||
| 工作电压Electrical Supply Voltage | DC | 24 | ||
| 电功率功耗Power Consumption | W | 50 | 120 | |
| 工作温度Operating Temperature | ℃ | 0 | —— | 50 |
| 储存温度Storage Temperature | ℃ | -40 | —— | 80 |
| 体积Dimensions (L x W x H) | mm | 250x112x52 | ||
* 本产品可以根据客户要求定制
Above specifications can be customized for your specific application.