Shown with optional YZ, two motorized axis head and granite bridge
2 m/s, 3g max speeds with 1 kg load
100 kg load capacity
Accuracy ±4 µm calibrated, ±25 µm uncalibrated
This is the two-meter travel, direct-drive PRO225LM linear-motor stage. It is used for laser processing, testing, and high-accuracy motion metrology. It is shown mounted (not mandatory) to a granite spar with a motorized YZ two-axis head. The stage can be configured to provide three-axis linear motion.
| PRO225LM-2000mm | ||||||
|---|---|---|---|---|---|---|
| Positioning | Travel | 2000 mm | ||||
| Accuracy | LT Standard | ±25.0 µm | ||||
| HALAR(1) | ±4 µm | |||||
| Repeatability(1) | ±0.75 µm | |||||
|
Geometric | Straightness(1) |
±20.0 µm | ||||
| Flatness(1) | ±20.0 µm | |||||
| Pitch | ±179 µrad (±37 arc sec) | |||||
| Roll | ±179 µrad (±37 arc sec) | |||||
| Yaw | ±223 µrad (±46 arc sec) | |||||
| Dynamic | Maximum Speed(2) | 2 m/s | ||||
| Maximum Acceleration(2) | 3g | |||||
| Other | Maximum Force (Continuous) |
See BLM-203-A (with cooling) | ||||
| Load Capacity(3) | Horizontal | 100 kg | ||||
| Side | 100 kg | |||||
|
Moving Mass |
7.4 kg | |||||
|
Stage Mass |
78 kg (no hardcover) | |||||
| Material | Aluminum body/black anodize finish/hardcoat | |||||
| Protection | No protection; components exposed from top of stage; hardcover or bellows optional - consult factory | |||||
Certified with -PLOTS option.
Speed and acceleration based on no load.
Maximum load based on bearing capability. Maximum application load may be limited by acceleration requirements.
Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.