1 m travel
3 m/s, 4 g with 1 kg load
Mechanical bearings
60 kg load capacity
Accuracy 5 µm calibrated, ±50 µm uncalibrated
Vacuum 10-6 Torr
This is a high acceleration, compact-footprint linear actuator designed for HARP high-acceleration, reciprocating probe applications. The long-travel actuator provides exceptional velocity stability and precise positioning in a very small footprint. It can be made for either air or vacuum-rated applications.
| ACT200HA | ||||||
|---|---|---|---|---|---|---|
| Positioning | Travel | 1100 mm (travel is reduced based on speed and acceleration requirements; travel for max speed specified is 1000 mm) | ||||
| Accuracy | LT Standard | ±50.0 µm | ||||
| HALAR(1) | ±1 µm | |||||
| Repeatability(1) | ±1 µm | |||||
| Dynamic | Maximum Speed(2) | 3 m/s | ||||
| Maximum Acceleration(2) | 4g | |||||
| Other | Maximum Force (Continuous) |
100 N | ||||
| Load Capacity(3) | Horizontal | 60 kg | ||||
| Side |
30 kg | |||||
|
Moving Mass |
5 kg | |||||
|
Stage Mass |
48 kg | |||||
| Material |
Aluminum body/no finish | |||||
|
Vacuum Rating |
10-6 Torr | |||||
Certified with -PLOTS option.
Speed and acceleration based on 1 kg load.
Maximum load based on bearing capability. Maximum application load may be limited by acceleration requirements.
Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and work-point dependent. Consult factory for multi-axis or non-standard applications.