声光驱动电源

Acoustooptic Modulation Driving Source

Model：ZG-RF-TTL-200M-2.5W-A1

1.概述 Overview

本文档规定了此款驱动电源的功能和技术指标，并对设备的接口、结构设计、质量保证、售后服务和包装等提出要求，是设备开展生产和交付的依据。

This document specifies the functions and technical specifications of this driver power supply, and puts forward requirements for equipment interface, structural design, quality assurance, after-sales service, and packaging. It is the basis for equipment production and delivery

2.技术要求technical requirement

2.1功能及性能Function and performance

2.1.1功能要求Functional requirements

a) 输出信号频率：200M

a) Output signal frequency: 200M

b) 工作电压：DC +24V±0.5V

b) Working voltage: DC+24V ± 0.5V

2.1.2性能要求Performance Requirement

c) 工作频率 200M

c) Working frequency 200M

d) 最大输出功率≥3W

d) Maximum output power ≥ 3W

e) 出厂输出功率≥2.5W

e) Factory output power ≥ 2.5W

f) TTL 隔离≤-60dBm(输出加 30dB 功率衰减器)

f) TTL isolation ≤ -60dBm (output plus 30dB power attenuator)

g) 工作电流≤500mA

g) Working current ≤ 500mA

2.2结构工艺及外观质量Structural technology and appearance quality

2.2.1外形尺寸Overall dimension

2.2.2表面处理Surface Treatment

本色氧化 Intrinsic oxidation

2.2.3标识identifying

无NO

2.3  接口要求Interface requirements