The 8743-CL 2-axis closed-loop intelligent motion controller/driver provides fine tuning, absolute positioning, compact and low cost solution for driving New Focus closed-loop Picomotors products. It is a single-box solution that can be manual controlled with the New Focus 8758 hand control pad or computer controlled via USB, RS-485, or Ethernet communication interfaces using Newport Motion Control Language (NMCL) command set. All three computer interfaces are well supported via Windows DLL, sample LabVIEW VIs, and intuitive graphical user interface (GUI) Windows application with device auto-discovery feature. Each model 8743-CL controller/driver has two 4-pin RJ-22 single output ports and two 15-pin D connector for the encoder signal that can be used with any single-channel closed loop Picomotor actuator at any given time.

• 类型

  Motion Controller

• 轴数

  2

• 计算机接口

  10/100 Ethernet, USB, RS-485

• 电源要求

  10.5 to 14.5 VDC

• 功耗

  11 W @ 2 kHz Sustained Speed, 2 W Idle

• 最大脉冲频率

  2 kHz  

• 工作温度

  0 to 65°C

• 储存温度

  -40 to 95°C

• 重量

  0.272 kg  

• 8743-CL二轴闭环智能运动控制器/驱动器为驱动新型聚焦闭环微电机产品提供了微调、绝对定位、紧凑、低成本的解决方案。它是一个单独的盒子的解决方案,可以手动控制与新福克斯8758手控板或电脑通过USB接口控制,rs - 485,或以太网通信接口使用新港运动控制语言(NMCL)命令集。所有三个计算机接口是通过Windows DLL,支持虚拟仪器VIs样本,和直观的图形用户界面(GUI) Windows应用程序与设备自动发现功能。每个型号8743-CL控制器/驱动器有两个4引脚RJ-22单输出端口和两个15引脚D连接器用于编码器信号，可与任何单通道闭环微型马达执行器在任何给定时间使用。