The AG-UC2-OEM Agilis™ Driver is designed to be integrated into OEM equipment by mounting directly onto your printed-circuit board. It can drive 2 axis at a time. If appropriately multiplexed it can be used switch between Agilis nanopositioners that have been embedded into your system. In a small compact platform, the OEM board provides convenient control adjustments of Agilis components that you can easily interface with it and build it into your device, instrument, or laboratory setup. The Model AG-UC2-OEM driver module requires an external power supply. For assistance and advice on integrating our OEM Driver please contact your local Newport representative.

• 类型

  Agilis OEM Controller

• 轴数

  2

• 计算机接口

  USB

• 电源要求

  5V, Through PCB Connection

• 最大脉冲频率

  1.7 kHz  

• 工作温度

  0 to 65°C

• 储存温度

  -40 to 95°C

• 重量

  0.163 kg  

• 
  

的AG-UC2-OEM Agilis™驱动器旨在整合到OEM设备直接安装到你在董事会。它可以一次驱动两个轴。如果适当地多路复用，它可以在嵌入到您的系统中的Agilis纳米定位点之间切换。在一个小型紧凑的平台上，OEM板提供了方便的Agilis组件控制调整，您可以轻松地与之交互，并将其构建到您的设备、仪器或实验室设置中。型号AG-UC2-OEM驱动模块需要外部电源。有关集成OEM驱动程序的帮助和建议，请与当地新港代表联系。