The 8712 Picomotor™ Driver is designed to be integrated into OEM equipment by mounting directly onto your printed-circuit board. It can drive a single Picomotor axis at a time. If appropriately multiplexed it can be used switch between Picomotors that have been embedded into your system. For assistance and advise on integrating our OEM Driver please contact your local Newport representative. 

It is the successor to our popular 8702 Driver is a drop in replacement with the same footprint and connectors. If you have previously been using the 8702 then the 8712 can be used in the same position. The height of the driver has been reduced and the RoHS version is now standard.

• 类型

  Motion Controller

• 轴数

  1

• 驱动方式

  Open Loop Picomotor

• 接口

  Pins for PCB Mounting

• 电源要求

  10 to 16 VDC

• 功耗

  7.5 W @ 1 kHz Sustained Speed

• 最大脉冲频率

  2 kHz  

• 工作温度

  0 to 65°C

• 储存温度

  -40 to 95°C

• 重量

  0.163 kg  

• 
  

8712 Picomotor™驱动器设计直接集成到OEM设备安装到你在董事会。它可以一次驱动一个皮运动轴。如果适当地进行多路复用，则可以在嵌入到系统中的微微电动机之间进行切换。有关整合OEM驱动程序的协助和建议，请与您当地的纽波特代表联系。

它是我们流行的8702驱动程序的继承者，在替换中减少了相同的内存占用和连接器。如果您以前使用过8702，那么8712可以在相同的位置使用。驾驶员的高度已经降低，RoHS版本现在是标准版本。