The NPX200SGV6 Vacuum Compatible Nanopositioning Linear Stage is a 200 um travel piezo-based linear stage providing nanometer resolution motion in the X axis. It is ideally suited for nanopositioning of small components such as mirrors, fibers, laser diodes, micro-optics, sensors, or cellular samples. Applications include optical delay lines, path length changes of interferometers, laser lithography, scanning microscopy, and patch-clamping, among others. NPX stages feature highly reliable, multi-layer, low-voltage piezoelectric transducer (PZT) stacks for high-duty cycle operations. A sophisticated, FEA-optimized, parallelogram solid state flexure guide system ensures perfect parallel motion. Due to the frictionless guide, NPX stages are maintenance-free, are not subject to wear and provide rapid response and fast settling performance making them suitable for use in dynamic processes such as high-frequency error compensation, tracking, fast stepping or continuous scanning. 
The closed-loop version features a high res strain-gauge position sensor for highly accurate and repeatable motion, that also compensates for actuator creep. The sensors are built in a full Wheatstone bridge design. It can be operated in either open or closed-loop control. Fastening is easy with a number of threads and alignment pin holes at the top and bottom plates. For mounting to optical tables, use adapter plate NPX-BP. Like with all piezo flexure devices, excessive moment loads and side forces acting between the top plate and the housing should be avoided during fastening.
Use with the NPC3SG Nanopositioning Amplifier.

NPX200SGV6真空兼容纳米级线性级是一个200 um行程的基于压电的线性级，在X轴上提供纳米分辨率的运动。它是理想的纳米定位小部件，如镜子，光纤，激光二极管，微光，传感器，或细胞样品。应用领域包括光延迟线、干涉仪的路径长度变化、激光光刻、扫描显微镜、贴片夹紧等。NPX级具有高可靠性，多层，低压压电换能器(PZT)栈为高占空比操作。一个复杂的，有限元优化，平行四边形固体弯曲导向系统，确保完美的平行运动。由于无摩擦导轨，NPX级无需维护，不会磨损，具有快速响应和快速沉降性能，适用于高频误差补偿、跟踪、快速步进或连续扫描等动态过程。闭环版本的特点是高分辨率应变计位置传感器的高度精确和可重复的运动，这也补偿了执行机构蠕变。这些传感器是按照惠斯通桥的整体设计建造的。它既可以在开环控制中操作，也可以在闭环控制中操作。紧固很容易，在顶部和底部板上有许多螺纹和定位销孔。安装到光学表，使用适配器板npg - bp。与所有压电弯曲装置一样，在紧固过程中，应避免在顶板和壳体之间施加过大的力矩载荷和侧向力。与NPC3SG纳米级定位放大器一起使用。