The 9062-XY-PN-M Motorized Gothic-Arch Bearing Stage incorporates our Picomotor™ actuators with our 40 x 40 mm platform gothic-arch-bearing translation stages to achieve the ultimate in stability and rigidity along with remote-control operation. A Picomotor actuator controls the X axis, while the Y axis is micrometer controlled. All necessary clamps, brackets, and base plates are included so that the stage can be used right out of the box. These stages offer stainless-steel construction, thumbscrew locks, and 0.5 inch (12.7 mm) travel range. Gothic-arch bearings offer the smooth motion of ball bearings but high stiffness and repeatability. The unique gothic profile provides four points of contact (rather than two) so that the load and momentum are more evenly distributed. Side-mounted micrometer clamps minimize the overall footprint. M4 and M6 threads

• 动轴

  X

• Micrometer Axes

  Y

• 行程范围

  12.7 mm  

• 平台尺寸

  40 x 40 mm

• 最小位移增量

  <30 nm

• 螺纹类型

  M4 and M6

• 材料

  Stainless Steel

• 轴承

  Gothic Arch Bearings

• 反馈

  Open Loop

• 电缆长度

  2.1 m  

• 接头类型

  4-Pin

• 工作温度

  10 to 40°C

• 
  

9062 - xy - pn - m机动哥特式尖拱轴承阶段包含我们Picomotor™驱动器与我们40 x 40毫米平台gothic-arch-bearing翻译阶段实现最终的稳定性和刚度以及遥控操作。皮姆马达执行机构控制X轴，而Y轴是千分尺控制。所有必要的夹具，托架，和基板都包括在内，以便舞台可以直接使用开箱。这些阶段提供不锈钢结构，拇指锁，和0.5英寸(12.7毫米)的行程范围。哥特拱轴承具有球轴承运动平稳、刚度大、重复性好等优点。独特的哥特式轮廓提供了四个接触点(而不是两个)，以便负载和动量更均匀地分布。侧面安装的千分尺夹具最大限度地减少了总占地面积。M4和M6线程