The FP-1A Fiber Optic Positioner provides three degrees of precision positioning for bare fibers. We’ve improved this mounts by adding high-resolution 100 TPI adjustment screws and including new larger diameter knobs with an integral hex hole for smooth adjustment with increased sensitivity. Fibers are aligned in three axes (XYZ) using the FP-1A. Axial Z motion is accomplished without rotation of the fiber by a knurled knob with a precision 80 TPI thread. The FP-1A includes a position lock for the XY-axes, and is compatible with FPH-S, FPH-S-2.5, FPH-J, or FPH-DJ chucks for bare fibers, which must be ordered separately. All FP Series Fiber Optic Positioners have threaded holes in their base for post mounting.

• 位移轴

  X,Y,Z

• 行程范围

  X,Y: ±0.063 in
  Z: ±0.14 in

• 光轴高度

  25.4 mm  

• 灵敏度

  X,Y: 0.75 µm
  Z: 1 µm

• 
  

FP-1A光纤定位器为裸光纤提供三度精度定位。我们通过增加高分辨率的100 TPI调整螺丝改进了这个支架，并增加了新的更大直径旋钮，带有一个整体六角孔，用于增加灵敏度的平滑调整。纤维使用FP-1A在三个轴(XYZ)上对齐。轴向Z运动是由一个精确的80 TPI螺纹滚压旋钮实现的，不需要旋转光纤。FP-1A包括用于xy轴的位置锁定，并与裸纤维的FPH-S、FPH-S-2.5、FPH-J或FPH-DJ卡盘兼容，这些卡盘必须单独订购。所有FP系列光纤定位器的底座都有螺纹孔用于后安装。