The 8081-M XYZθxθy Motorized Five-Axis Tilt Aligner increases the utility of our popular kinematic stages by motorizing each of the axes. The addition of Picomotor™ actuators to each stage allows remote high-resolution (<30 nm) adjustment of various combinations of X, Y, Z, θx, and θy. Model 8081-M five-axis aligners are ideal for positioning modulators or isolators and for coupling light into waveguide devices. M4 and M6 tapped holes.

Use with two 8725 multi axis adapters and two 8742 controller/drivers to control all 5 axes.

• 位移轴

  X, Y, Z, θx, θy

• 机制

  Piezo Motor

• 行程范围

  3 mm  

• 角范围

  8°

• 负载

  13 N  

• 最小位移增量

  <30 nm

• 角分辨率

  θx, θy≤0.7 µrad

• 接头类型

  6-pin Connectors (2)

• 工作温度

  10 to 40°C

• 螺纹类型

  M4 and M6

• 
  

8081 - m XYZθxθy五轴倾斜机动调整器增加我们的流行运动阶段的效用使机动化的每个轴。添加Picomotor™驱动器每个阶段允许远程高分辨率(< 30 nm)调整各种组合的X, Y, Z,θx,和θy。8081-M五轴对准器是定位调制器或隔离器和耦合光到波导器件的理想选择。M4和M6螺纹孔。

使用两个8725多轴适配器和两个8742控制器/驱动器来控制所有5个轴。