The P100-At38 is a kinematic optic mount specifically made for thin 1-in. optics.  The mount uses a threaded retaining ring to secure optics having a thickness of 4 mm or less.  Also included with the mount is a 0.5-mm thick Delrin washer to protect the optic from damage during tightening of the retaining ring.  The P100-At28 also features a rear-loading design to ensure the front face of the optic is always in the same location regardless of its thickness.  The mount has standard features like a 1-in. optical axis height, three 80-TPI hex key locking actuators, and an exceptionally thin 20-mm nominal profile.  The P100-At38 is designed with a center clearance hole for #8 or M4 screws.

• 镜片直径

  25.4 mm

• 驱动方式 

  Allen-Key, locking

• 调节 

  z, θx, θy

• 灵敏度 

  4.8 arc sec

• 特征

  Thin Optic Mount

• 角度范围

  ±4 °

• 调节螺纹

  80 TPI

• 材料

  Anodized Aluminum

• 机制

  Kinematic

• 镜片厚度

  4 mm

• 螺纹类型

  8-32 & M4

• 光轴高度

  25.4 mm

• 
  

P100-At38是专为1英寸薄型光学支架设计的运动学光学支架。光学。这种支架使用螺纹固定环来固定厚度不超过4毫米的光学器件。安装还包括一个0.5毫米厚的Delrin垫圈，以保护光学在紧固环期间免受损坏。P100-At28还具有后加载的设计，以确保无论其厚度如何，光学的正面总是在相同的位置。安装有标准的功能，如1英寸。光轴高度，三个80-TPI六角锁键执行机构，和一个异常薄的20毫米公称轮廓。P100-At38是为#8或M4螺丝设计的中心间隙孔。