The M-HVM-2i Industrial Vertical Drive Kinematic Optical Mount is unlike any optical mount in its class. The HVM’s unique ball-and-wedge drive mechanism enhances the overall performance of the 2 inch (50.8mm) diameter optical mount by reducing stiction and backlash to negligible levels while maintaining a compact and robust package. This unique drive mechanism also allows substantial angular tilt without adjustment screws protruding from the back of the mount, where fingers can block the beam. At a scant 0.82 inch thickness the HVM can be placed in optical systems requiring minimum footprint. Newport’s in-line spring mechanism provides targeted tension at appropriate points to ensure the HVM is stable both short-term and long-term. The high resolution adjustment screws have a locking mechanism to prevent inadvertent adjustment. This same mechanism provides the ability to customize the feel/tension of each adjustment.

M-HVM-2i型工业垂直驱动光学支架不同于同类光学支架。HVM独特的球楔驱动机构，通过减少胶粘和间隙到可忽略的水平，提高了2英寸(50.8mm)直径的光学安装的整体性能，同时保持了紧凑和坚固的封装。这种独特的驱动机构也允许有实质的角度倾斜，没有调整螺丝突出从背后的安装，手指可以阻止梁。HVM的厚度只有0.82英寸，可以放在需要最小内存占用的光学系统中。新港的内联弹簧机构提供了针对性的张力在适当的点，以确保HVM是稳定的短期和长期。高分辨率调整螺丝有一个锁定机制，以防止无意调整。这个相同的机制提供了定制每个调整的感觉/张力的能力。