The LDC-3726 Laser Diode Controller combines a precision current source with thermoelectric temperature controller. The integrated three range current source provides high stability output with maximum output currents of 100 mA/200 mA/500mA.

Multiple levels of laser diode protection include slow start, adjustable current limit and compliance voltage, intermittent contact protection, and output shorting relays. In addition, an integrated TEC interlock will shut off laser current if a user defined temperature range is exceeded. The integrated 32 W thermoelectric temperature controller will typically achieve temperature stability within ±0.002°C.

For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 or USB remote interface. LIV testing commands are built in to the instrument firmware. For virtual instrument programming, LabVIEW® intstrument drivers are available for download.

How are you mounting your laser diode?

• 激光器电流

  0.5 A

• 激光器恒流输出电压

  10 V

• TE 电流范围

  -4.00 to +4.00 A

• TE 电压范围

  -8.00 to +8.00 V

• TE 输出功率

  32 W

• 温度系数

  <50 ppm/*C

• 温度范围

  -100 to +200°C

• 计算机接口

  USB and GPIB

• 电源要求

  100-120 VAC / 220-240 VAC; 500W; 50-60 Hz

• 激光器电流分辨率

  10 µA

• 激光器电流精度

  ±(0.19% FS – 0.155% SP)

• 电流输出稳定性（24小时）

  <40 ppm

• 电流输出稳定性（1小时）

  <20 ppm

• 激光器输出噪声/纹波（低带宽）

  <10 µA

• 激光器输出噪声/纹波（高带宽）

  <10 µA

• TEC 电流 24 小时稳定性

  ±0.002 ºC

• TEC 电流 1 小时稳定性

  ±0.001 ºC

• TEC 波纹/噪声 (rms)

  <1.0 mA

• 光电二极管电流范围

  0 to 5 mA

• 重量

  11.93 kg

• 工作温度

  10 to 40°C

• 工作湿度

  <85% relative, non-condensing

• 
  

LDC-3726激光二极管控制器结合了精密电流源和热电温控。集成的三量程电流源提供高稳定的输出，最大输出电流为100毫安/200毫安/500毫安。

多级激光二极管保护包括慢启动、可调电流限制和柔度电压、间歇接触保护和输出短路继电器。此外，如果超过用户定义的温度范围，集成的TEC联锁装置将关闭激光电流。32 W热电集成温度控制器通常会达到温度稳定在±0.002°C。

对于研发或生产环境中的自动化测试应用程序，可以通过GPIB/IEEE-488或USB远程接口轻松完成远程操作。LIV测试命令内置在仪器固件中。对虚拟仪器编程,虚拟仪器®intstrument司机可供下载。