Model PSCOUT2-BASE is the Base Model of the PulseScout2 Autocorrelator family that can measure 20 – 3500 fsec pulses, between 420 – 1600 nm wavelength. This device is not equiped with a detection module. A detection module is required for desired wavelength and sensitivity (i.e. PMT or PD). 
The PulseScout2™ autocorrelators are a versatile, easy-to-use diagnostic tool for measuring ultrafast pulses. This autocorrelator family is capable of measuring pulse widths from both high repetition rate (MHz) oscillators and low repetition rate (kHz) amplifiers from visible to IR wavelength range. A photodiode detector module is suitable to detect and measure high-energy amplified pulses, and a photomultiplier detector module is to measure low-energy oscillator pulses. Conveniently, these detector modules are fully interchangeable in seconds. Alignment is straight-forward and can also be done easily even for first time users, making this autocorrelator an ideal diagnostic tool for all of your ultrafast applications. CE compliant.

• 模拟输出

  Delay: 0 - 10 V, Signal: 0 - 10 V

• 光束直径 (1/e2)

  2 mm  

• CE 认证

  Yes

• 计算机接口

  USB 2

• 输入

  Trigger, TTL

• 线性度

  1% of Actual Scan Range

• 最大脉冲功率

  1 µJ  

• 最大脉冲频率

  10 GHz  

• 偏振

  Linear / Horizontal

• 最小光功率

  2 mW  

• 最大光功率

  250 mW  

• 脉冲宽度

  20 - 3500 fs

• 远程控制

  TCP/IP (SCPI Standard) via Control Software

• 重复频率

  300 Hz

• 扫描范围

  150 fs - 15 ps

• 扫描速率

  10 Hz  

• 光谱范围

  420 - 1600 nm

• 
  

PSCOUT2-BASE是脉冲cout2自相关器系列的基本模型，可以测量20 - 3500 fsec脉冲，波长在420 - 1600 nm之间。这个装置没有装配检测模块。对于所需波长和灵敏度(即PMT或PD)，需要一个检测模块。的PulseScout2™自相关器是多才多艺的,易于使用的诊断工具用于测量超快脉冲。这个自相关器系列能够测量脉冲宽度从高重复频率(MHz)振荡器和低重复频率(kHz)放大器从可见到红外波长范围。光电二极管检测器模块用于检测和测量高能放大脉冲，光电倍增检测器模块用于测量低能振荡器脉冲。这些探测器模块在几秒钟内完全可以互换。对齐是直接的，甚至对于第一次使用的用户也可以很容易地完成，使这个自动相关器成为所有超快应用程序的理想诊断工具。CE兼容。