• Affordable single-axis control for low-power DC-servo or Stepper motor driven devices

• Ultra-compact – controller is smaller than 110x 53x 25mm

• Low noise linear amplifier technology for DC servo motor drives

• Advanced Backlash and Hysteresis compensation mode

• Fast USB communication

The CONEX controller is a very compact and inexpensive driver for Newport’s low power DC servo and Stepper motor driven devices. For out-of-the box control, the CONEX controller is preconfigured and delivered with the motion device. Available rotation stage configurations include CONEX-PR50CC, CONEX-SR50CC, CONEX-USR50BCC and CONEX-NSR1 Series actuators.

CONEX-CC
The linear amplifier of the CONEX-CC provides the optimum drive solution for low-power DC servo motors. Compared to other solutions relying on cheaper PWM amplifiers, the CONEX-CC delivers much smoother motion, with less electrical noise and significantly less motor heating.The DC servo motors are powered through a 24 VDC power supply, model CONEX-PS. For added convenience, the power can be shared with up to 5 modules using the supplied CONEX-PS-CB power chain cable.

CONEX-PP
Single-axis motion controller and driver for open loop, Intelligent Stepper motor devices. Up to 4 units can be daisy-chained and controller from a single GUI. The power supply is a 40W power supply for all CONEX-PP devices. 
Cables and power supplies sold separately.