钢结构，具有较高载重能力
可锁定的 360°粗略运动/4°精细运动
灵敏度高于 6 弧秒
有四种不同的尺寸
薄型版本
此价含增值税不含运费
An adjustment screw is included with these rotation stages.
We also offer Aperture Versions of these stages.
M- metric versions and S low profile versions have the same specifications as the imperial versions shown.
The "S" low profile version of this stage is 23 mm height.
M-UTR46 and M-UTR80 stages have M4 and M6 threads. M-UTR120 and M-UTR160 stages have M6 threads.
利用侧面安装的离合器旋钮，可实现在整个 360°（以 1°增量标记）范围内连续自由旋转，位移台主体上具有额外的游标刻度。灵敏度范围为 2 至 6 弧秒，具体取决于型号。
UTR Series stages can be table mounted using the optional PBN Series Base Plate. Stages mount with the included BR Series Mounting Bridles, through the stage collar near the base. Shown in the photo is a UTR80S mounted to a M-PBN8 base plate. Alternative solution for table mounting is to use BR-U Mounting Bridle when the base plate cannot be used.
Although they are most commonly mounted horizontally, UTR80S low profile rotation stages can be post mounted in a vertical orientation using the M4 threaded hole located on the side of the stage. Shown in the photo is a UTR80S mounted to 1 in. optical pedestal.
Low Profile versions of UTR Precision Steel Rotation Stages are available in the UTR46S and UTR80S, with metric version of each also offered as M-UTR46S and M-UTR80S. These low-profile stages save on lab space and keep optics and lasers closer to the table.
We also offer UTR-A Series manual rotation stages with a center aperture for optical access through the rotation axis or for mounting optical components to provide easy integration to systems like laser imaging or microscopes.
The UTR Rotation Stages are compatible with high load, double row ball bearing UMR Linear Stages to build configuration possibilities like the X, Y, θz stage stack shown. Shown here is the UTR80 mounted on top of two UMR8.25.
The UTR stages include special bridals to allow mounting to a variety of different stages. Shown here is the UTR80S mounted to two TGN80 Tilt Platforms for complete pitch, yaw and roll adjustment.
The UTR Steel Rotation Stages are compatible with UMR Steel Linear Stages, TGN Series Tilt Platforms, and MVN Precision Vertical Stages of matching size (for example, UTR80 with UMR8.25 and TGN80 , or UTR120 with TGN120 and MVN120). They can be combined to provide multi-axis motion and can be easily adapted to fit a specific system's needs. In the picture, a six-axis manual positioning system is shown using two UMR8.25s, two TGN80s, a UTR80S, and a MVN80.
全不锈钢结构
The UTR stages are made of stainless steel to provide a robust frame with centered load capacities up to 800 N. Bearings are preloaded into precision-ground, tool steel races for a smooth, accurate trajectory with minimum eccentricity.