Hold optic mounts at a fixed 45-degree angle
Compatible with English or metric PS series Pedestal Posts
Aluminum and Stainless Steel versions
For either threaded or clearance hole mounts
These Pedestal Post Adaptors enable mounting of optical components at a fixed 45-degree angle. Six different versions of this pedestal adaptor are available: The PS-45-SUP , which is made from stainless steel, is designed to hold any of the 1-inch Suprema mounts having a threaded mounting hole. The PS-45-SUP-C , also made from stainless steel, is designed to hold any of the 1-inch Suprema mounts having a clearance mounting hole. The PS-45-ULT , made from black anodized aluminum, is designed to hold any of the 1-inch Ultima Clear Quadrant mounts. All of these Pedestal Post Adaptors position the optic at a height of 2 inches on center with the pedestal and are provided with a cross-drilled through hole to allow leveraged tightening to the pedestal posts. Although these adaptors were designed specifically for the Suprema and Ultima Mounts mentioned above, they can be used with many other mounts as well. Please see the product detail tab for more detail.
The PS-1T is necessary when several pedestal posts need to be mounted as close as possible as shown.
The PS-1T Table Mount Adaptor allows mounting of PS-series Extension Posts directly to an optical table without a clamp fork. This adaptor is a 1-in high Pedestal Extension Post having a ¼-20 (M6) thread on one end and the standard 8-32 (M4) thread on the other; threaded studs included. The PS-1T is necessary when several pedestal posts need to be mounted as close as possible (almost touching, 1-inch apart) on an optical table. Note that the fork-clamp pedestal posts, because of their 1.25-in. diameter base, cannot be mounted this close together.
The PS-1T has a 1/4-20 thread on one end to allow direct mounting to optical tables.