Model 34 Rotatable Platforms provide exceptional versatility for mounting components at arbitrary angles. One end of the platform has a circular slot, centered on a clearance hole, to provide 360° positioning in continuous 90° steps when attached with two bolts. This allows you to position the mounting surface at any angle before locking it into place. The platforms may also be joined end-to-end for added length, or side-to-end to achieve compound mounting angles. Model 34 is especially useful with our Model 340-RC and 370-RC Clamps.

The 300-P Rod Platform provides a wide variety of component mounting variations. Constructed of aluminum, it has three machined mounting surfaces: one parallel to the post axis and two perpendicular to it. The platform clamp is double-bored, forming two line contacts along the bore to assure wobble-free clamping when the locking screw is tightened. It slides smoothly on Models 40 , 41 , or 45 Rods.

The Model 32A Fine Positioner provides fine height control. Firmly attaching to the rod, height adjustment is provided via a cap screw that engages a tapped hole in either end of the mounting platform. The cap screw runs in ball bearings and provides a height adjustment range of 0.7 in. (18 mm).

OM-340-rc-SModel 34 shown mounted to a Model 340-RC Clamp and Model 45 RodOM-32a_300p-SFine height adjustment can be made on the 300-PRod Platforms by using 32A Fine Positioner.