The fiber jacket option is only available with fiber length ≤ 5 m.Reduced bend loss sensitivity versus standard telecom fibers
Good splicing performance
High strength
Available in both 80 and 125 µm clad diameter
Multiple fiber wraps on a mandrel
Newport offers an extensive line of specialty optical fiber products. Bend-insensitive, single-mode sensor grade fibers, available with 820, 1310, and 1550 nm cutoff wavelengths, feature a high NA of 0.16, making them suitable for tightly wound fiber spools for a variety of sensing applications.
At 1310 nm, for example, the maximum bend induced attenuation, due to 100 fiber turns on a 10 mm mandrel, is only 0.05 dB! Both 80 and 125 um cladding diameters are available, with bend insensitivity increasing with smaller fiber diameter. These fibers are commonly used in fiber optic gyroscope assemblies or in optical fiber payout systems.
For custom options please call a Newport Applications engineer.
The following volume discount schedule is automatically applied when ordering bare optical fiber: 11 - 50 m with 15 %, 51- 100 m with 22 %, 101- 500 m with 25 %, > 501 m with 28 %. Discount applicable to continuous length of fiber only.
The fiber jacket option is only available with fiber length ≤ 5 m.
Use Model Number F-PATCH-CUSTOM for configuration. Add to cart and checkout.
Configuration is performed at Checkout in the Shopping Cart by clicking on the Red Wrench.
Users can customize:
Fiber Type (Select from almost all of Newport\'s available optical fiber)
Fiber Length (1-1000 meters)
Input Connector (FC, SC, ST, SMA, LC, 2.5mm Ferrule)
Output Connector (FC, SC, ST, SMA, LC, 2.5mm Ferrule)
Jacketing (≤ 5 meters only, 900 µm loose tube, PVC jacket, SS Armored)