Title

该系统能够同时测量3束连续波和脉冲光。提供广泛的光谱响应，从深紫外，可见光和高达1550nm。高精度测量——边到边的偏差小于5um。它是一个基于USB3.0的设备，具有通过RS232将数据导出到另一台计算机的能力、数据记录和详细统计、用于集成到用户应用程序中的SDK控制。

订购信息

该系统配有一个摄像头、一套2×NG10过滤器、一个安装柱、USB连接、CD盘上的软件、手提箱。

（*）基于VIS的标准CCD，涂有荧光涂层，能够捕获1550±50nm范围内的信号。

配件

NG10 Filter: NG10 filter in housing (3/4” – 32 thread), filter width 1.6mm ±0.1mm

规格

Beam size range	∅50 μm – ∅5 mm
Spectral Response	350 – 1310 nm
Sensor Resolution	1280 x 1024
Optical dynamic range	Up to 1011 using all filters and software controlled electronic shutter and gain
Sensitivity	~0.5 nW/cm² @ 633 nm ~15,000 nW/cm²@ 1310 nm (15 μW/cm²)
Saturation	~1mW/cm², no filters
Power measuring	With user’s pre-calibration at a selected point
Dimensions	∅63 mm x 51 mm deep
Environment Operating Temperature	0° – 35° C
Weight	300 gr with cable
Filters	NG-4, NG-9, NG-10
Interface	USB 3.0
Sensor type	1/1.8″ format
Sensor active area	6.78 (w) x 5.4 (h) mm (diagonal 8.7 mm)
Pixel size	5.3 μm (H) x 5.3 μm (V)
Shutter speed	9 – 200,000 μsec
Damage threshold	50 W/cm² with filters
Maximum frame rate	Over 50 Hz
Null	In CW mode, null function is available to automatically subtract background
Operation with pulsed lasers	Ability to capture and replay pictures and statistics from a slowly pulsing laser (1-100 Hz) while filtering out frames with no laser pulse. Gain control and external filters make it easy to obtain optimum intensity
Trigger	– Hardware Falling Edge – Hardware Rising Edge – Enable/Disable Trigger Delay – Trigger Delay 0.015ms – 4.0 sec