Lexel ColorPro and BeamPro gas-ion lasers were developed specifically for laser shows and laser displays. The ColorPro series gives the best balance of white light and high power, for full-color laser graphics. The BeamPro series are for tight, powerful coherent laser beams, as well as single- or 2-color laser graphics.

Applications

Touring and nightclub environments are rough on lasers. That\'s why rugged ColorPro and BeamPro lasers are designed for long, stable life. They are perfect for:

Laser graphic displays (ColorPro)		Laser beam displays (BeamPro)
Full-color laser vector graphics Laser-projected TV/movies Applications where color fidelity is important		Single-color or 2-color laser vector graphics Indoor and outdoor beam displays Applications where high power is important

Specifications

There are five models available; two white-light, two higher-powered green/blue and one for red-only beams. Additional models are available with optics to give specific combinations of lines and powers.

Power supply, head and tube

Lexel ColorPro and BeamPro lasers are CDRH-certified with all safety features. They come with a one-year/1,000 hour warranty.

Power supply
The power supply front panel contains all controls necessary to operate and fully monitor the laser system.

Laser head
Within the laser head, an ultra-stable solid Invar® optical resonator holds the plasma tube and mirrors in precise alignment to create coherent laser light.

Laser tube
A simple and reliable plasma tube design. Lexel\'s solid ceramic plasma tube design has been proven since 1972, while other ion laser manufacturers have tried and abandoned several designs in an attempt to match Lexel\'s stability and performance. In fact, a majority of the more than 18,000 Lexel plasma tubes  still operate today, some with 20,000 hours of use.

Standard features

Current and light regulationThe Lexel ColorPro and BeamPro lasers can be operated in current or light control:

n Current regulation allows direct control of the current through the plasma tube via an external source.

n Light regulation provides the ultimate in laser output stabilization. A small portion of the light is sampled within the laser and compared to a reference signal in a differential circuit that automatically adjust the laser current to maintain a constant output.
     This feature also allows for the light level to be modulated externally with a ± 10 volt signal.

Model 502 Multiline Mirror HolderThis assembly holds the high reflector mirror for Multiline operation. This feature may be substituted for the Model 500 wavelength selector.

Fine tuning 
The laser is aligned accurately with the use of fine tuning knobs.

Remote turn on This feature permits the laser power supply to be turned on and off and the plasma tube to be started remotely.

Automatic startingThis circuit automatically starts the plasma tube approximately 20 seconds after the power supply is turned on.

Panel-mounted power meterThis multirange power meter continuously displays the output power of the laser.
 

Optional features

Model 500 Temperature-Compensated Prism Wavelength Selector Stable single line operation is achieved by Lexel ion lasers with the Model 500 prism wavelength selector. A full Brewster prism is utilized to achieve good separation of even the most closely spaced lines.

Initial Installation and Hands-On Training
One-day on-site installation and hands-on training for ColorPro and BeamPro series lasers, within the U.S. and Canada.